Can someone help me and tell me how to get this off my dash??? I can’t figure it out and I’ve tried to click on the settings button, the mustang button and the other button on the steering wheel. Any suggestions?
So I have done a muffler and resonator delete a while ago about less than a year and have had no issues. I run a burble add on with a cobb device but I wanted a high flow catalytic converter/ downpipe. I bought this downpipe from American muscle, it is the XForce downpipe and I didnt see but...
Help Needed (P0456)
I recently replaced my Failing purge valve, Car was struggling to start until I tapped the gas to get it to idle. I had P0456 (EVAP Emission System Small leak, and P1450 (Unable to bleed Fuel tank vacuum.)
After I replaced the purge valve, i cleared my codes and I went to...
Guys i know people who drives a stang shouldn’t care a lot about gas mileage or the money spend for gas.
i have a 2015 ecoboost. Nothing major.. roush intake, custom catch can and running on 18” wheels.
the car was tuned before I bought it and not on a tune now. Basically stock.
so, occasionally i’d get a p0301 code on cold starts only.
i have a 2017 with 41,000 miles on it
mbrp catback exhaust
i’ve switched the coils - not the problem still stays on cylinder 1
checked the spark plugs, they’re nearly perfect
no signs of vacuum leaks
So my brother was mad and “disabled” my 2017 and won’t tell me what he did to it. When I go to turn it on, it tells me “Press the brake to start” but the engine never actually turns on. I already checked the fuse boxes and the battery and can’t figure out if something could be unplugged or if...
Ok I need a little help. I'm looking at purchasing a bow off valve for my 2017 ecoboost. I'm curious, if anyone that has put on one or changed or their old one, has a recommendation between Duel Port or Recirculating? Which one is going to give me the best bang for my buck? Is there a...
Hey guys I just recently installed on 3 performances charge piping, intercooler, bov, and intake kit. I also have a tune from unleashed tuning. I have the following codes now: P0035, P0458, and P059F. Could I please get some help with these? Thank you
I recently bought a manual 2015 Ecoboost with 42k miles which is the first manual car I've ever owned. Ever since I bought the car, the shifter shakes on startup in or out of gear. It doesn't seem to be as bad when starting in neutral, but it still shakes. Is this something to be...
Hey there guys, I just picked up a 2017 on Saturday. After a day of spirited driving I popped the hood and saw what appears to be oil on the cover. I did not see any in other places such as the firewall or under the car. Does anyone have any ideas on what I should look at?
Hi everyone, this is my first post here! and I’d like to know your guys’ suggestion if the mods I plan on getting for my current stock mustang is a good start.
List of mods that I plan on getting:
Cobb access port
MBRP race exhaust
JLT 3.0 oil catch can
NGK spark plugs pregapped by Tune+
So Im trying to figure out what the best turbo for my car would be. I know about the vargas turbo and the turbonetics turbo. Which is more reliable to buy? im trying to figure out how i wanna build my car when i get back to the states. Im also going to buy a new intercooler, intake, down pipe...
2017 Ecoboost mustang with 47k miles
Car continues misfiring horribly.
I am getting oil on the electrode of the 3rd cylinder spark plug. when I change the plug it runs fine for a couple of minutes and then it starts to misfire again.
I got the valve cover and gasket replaced. I...
I have a 2017 manual. I bought a steeda clutch spring and Transmission Mount Bushing. All my tools are in Cali, i am looking for anyone to help me out installing these two parts in Austin area. I would greatly appreciate it.
Planning to have these installed before i start driving to...
i've posted this about a month ago, but i'm gonna post it again to see if i can get my issue out to some new eyes. i've installed my cold air intake and followed everything that the instructions said to do. But i am hearing this thumping/knocking sound come from the engine bay, from the inside...
i've installed my cold air intake and followed everything that the instructions said to do. But i am hearing this clicking/knocking sound come from the engine bay, from the inside of the car it sounds like knocking or popping but from the outside when i pop the hood it sounds like a clicking...
I screwed off the cap but only the cap came off tried twisting it out then only top part came out with a spring then pulled out the metal with another spring then poured more coolant how do I take this stupid cap off and will it still fully function if I put all parts back?