Ford Mustang Ecoboost Forum banner

performance

  1. Performance Tuning

    Mustang EcoBoost Performance
    2018 Ecoboost Performance Package with JLT CAI. I tried a Superchips tuner and it worked great in normal driving mode with boost like I haden't seen before. Once I switched to track or drag mode my car went into limp mode with the Check engine light on. I returned the Superchips product...
  2. Throttle Body Replacement?

    Mustang EcoBoost Performance
    Anyone here replace their stock throttle body with say a 65mm or 70mm? What were the results? Any better performance or no? Does it need a custom tune?
  3. Cobb Stage 2 to Custom Tune?

    Mustang EcoBoost Performance
    I know I've posted a number of times lately that I'm perfectly content with where my car is performance wise, Cobb Stage 2 (disregarding the HP and TQ numbers that I'm pulling or believe to be pulling), but the question to all of you is this. Would you, if sitting around 310 HP to the wheels...
  4. CV Fab Intercooler Review and Datalogs

    Mustang EcoBoost Performance
    hey guys, I recently got lucky enough to get my hands on CVFab's new intercooler for the Ecoboost mustang and I'm beyond happy with it! let's start this short and sweet, beautiful TIG welds, full aluminum tanks, double stock size, more than 40 degree drop in AIT (my own data logs, not some...
  5. COBB OTS Tune to Adam Custom Tune?

    Mustang EcoBoost Performance
    Has anyone gone from a COBB OTS tune to a custom tune by Adam? If so, can you tell me what OTS tune you were running and give me an idea of the results after the custom tune was applied? I'm considering shelling out the $200 for a single custom tune, but honestly not sure how much more HP & TQ...
  6. Missouri?( stouis?)

    Midwest Mustang EcoBoost Owners
    Around the south county area..looking to see if there any locals around that would like to do a meet etc.. drop your info below
  7. Are Lighter Wheels Really Better?

    Mustang EcoBoost Performance
    Not tested on a Mustang, but good info here: Are Lighter Wheels Really Better? We always hear that lightweight wheels are better. Reducing unsprung mass theoretically helps a car’s suspension work more effectively. Reducing rotating mass should make the car accelerate and stop faster as well...
  8. OK. What do we know about RaceChip? Anything?

    Mustang EcoBoost Performance
    RaceChip function and installation TIA, Matt
  9. Disc brake rotors - discussion here

    Mustang EcoBoost Maintenance
    Yeah, I noticed! Why didn't you go with drilled brake disk? Sent from my Z812 using Tapatalk
  10. Here's a little ditty on Octane

    Mustang EcoBoost Performance
    I stumbled across this and read the entire post. It is a really good and interesting read on octane on your 'boost. 93 Isn't 93... - 2015+ S550 Mustang Forum (GT, GT350, GT500, Mach 1, Ecoboost) - Mustang6G.com Not to mention discussion of tunes.
  11. FRPP Finally Announced!

    Mustang EcoBoost Discussions
    Came across this today from Ford Performance! FORD PERFORMANCE POWER PACKAGES NOW AVAILABLE FOR ECOBOOST- AND V8-EQUIPPED MUSTANGS Two pertinent/drool-worthy notes: I don't see the Ecoboost pack listed yet, while the GT is, at least as of 10AM PT: Performance Packs - Mustang Pacsk, Fiesta...
  12. Ford's Ecoboost Performance Calibration Kit Released

    Mustang EcoBoost Performance
    Seen this on other boards and Facebook but not much fanfare from Ford itself: Ecoboost Performance Calibration Kit Includes: M-9603-M23 air inlet kit Pro Cal 3 calibration interface Calibration voucher Calibration features: Peak gains of 30hp and 70lbs/ft at ~5500rpm 40hp and 60lbs/ft...
  13. MotorWeek | Comparison Test: Performance Car Challenge

    Mustang EcoBoost vs The Competition
    MotorWeek | Comparison Test: Performance Car Challenge Part 2 Here's the Youtube video Head over to MotorWeek for part 1 which is the challenge of the v8's.
  14. Shift Light -- anyone have one?

    Mustang EcoBoost Accessories
    With the 100a package (base) there is no fancy changing color tachometer to act as a shift light. Anyone thought of adding one, and if you have what product/procedure have you used? I've only found information on the V8/Coyote motor.
Top