Ford Mustang Ecoboost Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
319 Posts
Discussion Starter #1
I fitted 25mm spacers all round, however afterwards I seem to hear something odd with the front steering. It sounds as if the tyres are slipping when I turn the steering. I thought it may be the tracking needs adjusting because of the spacers.

As anyone experienced the same ?
 

·
Registered
Joined
·
1,348 Posts
Ive had 25mm on the front for 2 years. Not a daily driver, but havent had any issues. Roughly about 5k miles, including a few trips to the dragstip.

Had them all around, then changed to a drag wheel/tire setup in the rear. Left them on the front.
 

·
Registered
Joined
·
1 Posts
Are your spacers with hub centric or not?You can measure the distance between wheels and fenders to determine what thickness of wheel spacers to install.

I had BONOSS wheel spacers 20mm on my car for almost 21,000 miles, with no issues whatsoever.
Maybe you can try what I installed.

They can customize the thickness and data that I want, so that I can install new tires with different data, and the customization time is very fast, just 1~3 days.
They have aluminum alloy 7075-T6 and 6061-T6 options. 7075-T6 will be more expensive but better in quality. In fact, 6065-T6 is good enough. Its tensile strength, yield strength and elongation can support our normal use. And its lugs are grade T10, studs are forged grade 12.9.

If you need it in the future, this is their case article.
 
1 - 5 of 5 Posts
Top