Ford Mustang Ecoboost Forum banner

1 - 20 of 476 Posts

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #1
Not exactly a build. I'll document the mods that I'm doing to mine as I go along.
(updated 4/14/2017)

Base EB (100a package)
Performance package
Recaro seats
Back up warning

Purpose - fun time driver and track monkey (Autocross and HPDE/DE events)
Mostly will remain stock but upgrades for comfort and trackability will be added

Done--
  • Track wheels/tires - Ultra-high performance summers on 18" x 9.5" wheels
  • Steeda front K brace
  • Cobb AP tuner
  • Schroth rallye-3 harness
  • Tint - 5% in the back windows (3)
  • Mishimoto catch can
  • "Mechno" pony in guard for the front grille
  • redline hood struts
  • Diode-Dynamics LEDs-back up light; trunk; glove box; maps; vanity
  • Diode-Dynamics switchback turn signals/LED front markers
  • Barton shifter with 50th Anniv shifter-ball
  • GT-350 start button
  • NATO magnetic phone/device mount
  • Ed Hanson's custom Magnaflow 2-1/2" exhaust
  • Steeda Jacking Rails:
  • Steeda rear sway bar
  • Baer brakes braided steel brake lines
  • Steeda MT-82 Transmission Mount Bushing Insert
  • Diode Dynamics LED side marker lights
  • Cobb intercooler
  • JLT Cold Air Intake
  • Steeda throttle body spacer
  • Cobb Stage-2 tune for the Accessport
  • "Spinnywoosh" Lemans style track day numbers (19)
  • Ford Racing M10B776MR Mustang Push Button Start Kit GT350 Red 2015-16
  • Steeda 35# clutch spring.
  • Koni S550 Mustang Sport Adjustable Rear Shock (15-16 All)
  • Koni S550 Mustang Sport Adjustable Front Strut (15-16 All)
  • Ground Control Coil Over kit (uses the Koni shocks)
  • Ground Control camber/caster plates
  • Ford Mustang Steering Wheel Upgrade - GT350
  • Steeda S550 Mustang 12mm Spacer Kit for Billet Rear Shock Mounts (15-17 All)
  • Ford Racing strut-tower brace
  • CURT class-1 trailer hitch/light wiring
  • WeatherTech floor liners
Wish List
  • **Purchased .. just need to install
GRI boost control valve
2015-2016 Mustang Manual trans cooler air scoop
2015-2016 MUSTANG MANUAL TRANS COOLER AIR SCOOP
MA Performance tune for the Cobb AP tuner
Steeda Clutch Fluid Line Braided Stainless Steel
Steeda 555-7016 Mustang Clutch Fluid Line Braided 2015-2016
Blowfish Racing Manual Shifter Support Bracket 2015-2016
Blowfish Racing MSSB1 Mustang Shifter Support Bracket 2015-16
Sway bar mounts
Steeda S550 Billet Rear Sway Bar Mounts (2015) 555-8147 | Free Shipping!
Steeda differential bushing kit
Steeda S550 Mustang Differential Bushing Insert System - Street to Full Race Combo Kit (2015 GT) | 555-4442 | Free Shipping!
1 piece alum drive shaft
The Driveshaft Shop Manual Mustang EcoBoost 900HP 3.5" Aluminum 1-Piece CV Shaft (2015 EcoBoost) | 891-FDSH27-A | Free Shipping!
Front and rear hub assemblies with ARP studs
https://www.summitracing.com/int/parts/fms-m-1104-b
https://www.summitracing.com/int/parts/fms-m-1104-ab


Will update/edit this as I go along





 

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #2
LEDs
 

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #3
Grille pony - not done as the "shutters" are preventing access.
Not sure if I want to pull the whole nose just to replace the pony.

This may wait until intercooler upgrade.
 

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #4
Harness - already off to the tool store for a heavier T45 torx. It appears that the line peoples used air on these bolts.
Getting him ready for the track on Sunday


 
  • Like
Reactions: RedRoush

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #5
Luckily I went out for torx -- I needed a t50 as well and my original set didn't have one. :eek:







There is a great tutorial on how to install one of these harnesses over on M6G - look in the racing/autocross/hpde section.

Almost ready for Sunday. Will do the catch can this weekend.
 

·
Super Moderator
Joined
·
1,557 Posts
those harnesses look really really good with the recaro's . UGH I want a set now
 

·
Registered
Joined
·
181 Posts
Car looks great Squid !! If you would mind can you tell me what LED lamp you got for the back up light? I want to change that and the interior lights to LED. Thanks in advance,
DJ
 

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #8
  • Like
Reactions: mpd3244

·
Super Moderator
Joined
·
1,557 Posts
Thanks Squid, You just caused me to spend more money lol
 
  • Like
Reactions: turbopony

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #10
You're welcome.
 

·
Super Moderator
Joined
·
1,557 Posts
I ordered them this morning didn't order the reverse light though.
 

·
Registered
Joined
·
181 Posts
I bought the Phillips LED replacement for the inside W%W map lights and i will try to get them in today or tomorrow. I also picked up a Pep Boys special reverse LED and I will post them up as well.
 

·
Super Moderator
Joined
·
1,557 Posts
Well squid I'm gonna look more like your car soon. I ordered black lugnuts, black caliper paint and black wheel paint. Just hoping it all gets here by this weekend and I can do some visual improvements
 

·
Super Moderator
Joined
·
1,557 Posts
IMG_20150319_200048.jpg

Those new led lights make a HUGE difference squid
 

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #16
They do. I need to install the visor and glove box lights. Leave the difficult ones for last.
 

·
Super Moderator
Joined
·
1,557 Posts
The visors weren't that hard. The glove box was easy too think it took longer getting the visors apart then putting the light in
 

·
Super Moderator
Joined
·
6,116 Posts
Discussion Starter #18
LED results.


 

·
Registered
Joined
·
27 Posts
Love it dude!! Congrats!

Not exactly a build. I'll document the mods that I'm doing to mine as I go along.

Base EB (100a package)
Performance package
Recaro seats
Back up warning

Purpose - fun time driver and track monkey (Autocross and HPDE/DE events)
Mostly will remain stock but upgrades for comfort and trackability will be added

Track wheels/tires - Ultra-high performance summers on 18" x 9.5" wheels of some sort
Multi adjustable shocks or eventually coil-overs
Heavier sways front & rear
Transmission brace
Steeda front K brace
Steeda shock tower brace (maybe)
1 piece alum drive shaft
Ultimate racing single 3" exhaust
Mishimoto intercooler
Mishimoto catch can
Schroth rallye-3 harness

"Mechno" pony in guard for the front grille
redline hood struts
LEDs-back up light; trunk; glove box; maps; vanity

Will update as I go along
/QUOTE]
 

·
Super Moderator
Joined
·
1,557 Posts
Yeah he's making us all look bad cause he actually started a build thread :D
 
  • Like
Reactions: fury88
1 - 20 of 476 Posts
Top