Ford Mustang Ecoboost Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,083 Posts
Yes, you need to get a small pocket size screwdriver or pointed pick to pry up in the green lock tab where the "push" is labeled on it about a 1/4' until it clicks up so that it will the fitting can slide up over the intake barb then push the green lock tab down so its flush with the outside of the fitting like you show in the pics. Right now, you are trying to install it with the green lock tab in the locked position, must be pulled up to put in unlock position.

BD
 
  • Like
Reactions: arni0202

·
Registered
Joined
·
1,083 Posts
Hope they do get you the correct connectors. I did not know there were different length connectors.

BD
 
1 - 2 of 2 Posts
Top